Ballast Fitting Air Release Valve
Air Release Valve for Fly High Ballasts A turn of this air release pluf will release unwanted air from your Fly High Pro X Series Fat Sacs.
Air Release Valve for Fly High Ballasts A turn of this air release pluf will release unwanted air from your Fly High Pro X Series Fat Sacs.
Input voltage 12/24V• Dual-USB charging port, total output 5V/3.1A• Has digital display for read outs• Dual Power sockets• On/Off switch on the du...
View full detailsDo you have a “larger” buddy that makes it difficult to balance the weight distribution in your ride? The Pro X Series Fat Brick will help you solv...
View full detailsThese V-Drive Fat Sacs for Sports fit perfectly in the compartment of your v-drive boat to produce a nice wake for surfing or wakeboarding. Try com...
View full detailsWake Ballast 750 Pound Bags The original Fat Sac™ redefined and setting new standards. These sacs are the most demanded sacs on the market for thei...
View full detailsNo Crew no problem! Lay down 500 lbs of ballast and turn your boat into a wake throwing machine. Be sure to balance out the back weight with a fro...
View full detailsThe fat sac Integrated Bow bag is designed to fit under the seats of open bow boats adding needed weight to the front of the boat for the perfect w...
View full detailsIf you take your wake sports serious then you will want to maximize every opportunity you have. Bigger is better because you can half fill these b...
View full detailsNew Supa Tsunami Pump, Juiced Edition • Currently, the most lightweight fastest pump from start to finish just got even Faster with the Supa Tsun...
View full detailsWake Tube Ballast • Tube Sac 370 pounds• 62 x 16 x 10 inches The Pro X Series Tube Sac can be used in the ski locker of your boat or on the floor ...
View full detailsV Drive 400 Pound Ballast Set = 800 Total V-drive Fat Sacs (Set)• Extra valve included! Now made with an extra 4th valve at the bottom end, stand...
View full detailsDo not add this product to your cart. Please visit the bundle page to edit. This is a dummy product and must not be deleted or ...
View full detailsFatSac Bumpers will protect your boat from any scratches, dents or dings during boat tie ups, lake parties or when pulling up to a dock. Bumpers ca...
View full detailsNew Larger 4" diameter fill/empty hole. 11" wide x 14" long x 9.5" high Holds 50 pounds of water. Hydro fill within seconds by scooping the water ...
View full detailsThe small but mighty Mini Inflatable Bumper works great to protect your boat from dents, dings and scratches. The mini bumper is hung vertically fr...
View full detailsLoading the back of the boat up with weight is great but you need to balance it out to get the perfect wake. Wakesurfing and wakeboarding are spor...
View full detailsFly High Female GHT - Male Quick Connect Part W732
Fly High Ballast Fitting 1" Flow Rite Straight Quick Connect Socket
Fly High Male Quick Connect- Tsunami Pump Thread
Fly High Ballast Fitting - 3/4" Barbed End- Sac Valve Threads - Should be screwed into Pro X Sac with all purpose PVC cement.
Fly High and Fat Sac Fittings Fly High Female quick connect with chain and cap- Sac Valve Threads Attached Quick Connect Cap